Camera view not rotating
For when you've got a stubborn camera that is refusing to rotate.
Try to rotate the camera through the Monitor Settings (Settings > Basic Properties )
If the image is still not rotating then reboot the individual camaera.
- ssh root@$host
- ssh root@$camIP 'reboot'
This camera will now reboot and you'll still be connected to the Tiger.
From the Tiger reboot the API and the monitor display:
- systemctl restart api-httpd atlasgui
Give it 20 seconds and then check the camera orientation now.
host is Tiger's IP address.
camIP can be found from the API: /config/camera/
Related Articles
SmartMX Camera Troubleshooting
Software Check Before continuing with this guide first confirm the following: The camera view is not loading on the display (see below) The other camera views are working (use the on-screen buttons to check) Support has confirmed there's no software ...Reverse Split View Configuration
Reverse Split View Configuration What is it? When the vehicle is in reverse you will have the option to toggle between rear, left, and right views with the left and right chevrons. *If you can use "setReverseToggleLeftRight", this will do all the ...SmartMX Camera - Firmware Update Bug
After updating to firmware 1.2.0+, the SmartMX camera may turn on at boot and then minutes later power off for no apparent reason, this could be a symptom of a firmware update bug. If the Vehicle has been added to Black Moth Universe then a patch ...How to Install / Remove SmartMX Camera
Turn off TigerMX-5 System Follow this process to safely shutdown the system: How to Reboot / Shutdown / Hard Power Cycle Removing and Installing SmartMX-180 Camera 1. Disconnect Camera 1.1. While holding onto the knurled (textured ridge) grip of the ...Camera serial / item number is empty or null
Example: "ip": "10.0.0.128", "item": null, "mac": "14:1f:ba:91:02:a1", "name": "left", "online": true, "orientation": "rotate-180", "poe_port": 4, "pose": { "rotation": { ...