TigerMX-5 Settings > Reversing Camera
About This Page
This page is used to perform the setup for reverse lines. This will provide an overlay in the reverse override view that shows a distance indicator.
Accessing This Page
This page can be accessed from:
Page View
Setup Instructions
Rear Camera Setup
View Confirmation
Page Usage
Setup Instructions
The Setup Instructions page describes the setup required before using this utility.
Press NEXT to continue to Rear Camera Setup.
Rear Camera Setup
Rear Camera Setup is used to enter the pose details of the rear camera.
- Height - The vertical distance from the ground to the centre of the lens
- Offset - The horizontal distance from the centre of the vehicle to the camera (along the vehicle's width)
- Pitch - The vertical angle of the camera from the vehicle's centre line
- Diff - The horizontal distance from the centre of the vehicle to the camera (along the vehicle's length)
- Yaw - The horizontal angle of the camera from the vehicle's centre line
Pressing any of the white fields will cause a keyboard to appear, enabling the user to enter the appropriate value.
Press the return key on the keyboard to hide it.
Press NEXT to continue to View Confirmation.
View Confirmation
View Confirmation is used to confirm the reverse lines view. Once Rear Camera Setup is completed, a reverse lines overlay will appear in the framed view on the left. Follow the checklist to confirm that "Reverse Lines"-
- is a view from the correct camera(s) - eg. "rear",
- shows reverse lines that correspond well with the positions of cones/markers placed behind the vehicle,
- is not misleading if used as a guide for reversing the vehicle.
Press CONFIRM to confirm the view.
Related Articles
TigerMX-5 Settings
About This Page Use this page to navigate the various settings pages. Accessing This Page An installer pin is required to access this page This page can be accessed from: TigerMX-5 Toolbar > Settings Page View Page Usage Used to navigate to one of ...TigerMX-5 Settings > View Verification
About This Page This page is used by technicians to verify the correct set up of various views. Please ensure the respective setups are followed closely to ensure correctly calibrated views. Accessing This Page This page can be accessed from: ...TigerMX-5 Settings > Camera Calibration
Camera Calibration About This Page Background In order to accurately detect (and display) objects in their environment, Black Moth cameras need to be calibrated both intrinsically and extrinsically. Intrinsic calibration is for parameter modelling ...TigerMX-5 Settings > Video Retrieval
About This Page This page can be used to create a video retrieval for the unit. Results are available on the unit, uploaded to Universe and/or saved to a selected USB drive. Accessing This Page This page can be accessed from: TigerMX-5 ...TigerMX-5 Settings > Basic Truck Properties
About This Page The Basic Truck Properties page allows you to enter parameters specific to the machine that the Black Moth system is installed on. Within this page, you can: Set the basic properties of the unit, Length Width Volume Vehicle Make ...