Monitor
Monitor Blue Screen Tint
This fault will appear as if there's a blue overlay on top of the normal expected video feed on the monitor. Firstly, if there are 2 monitors it's recommend to follow the below troubleshooting guide to confirm the fault. Monitor Troubleshooting - ...
Disable TouchScreen Function
This guide will show you how to trick the monitor into using another device as it's touchscreen input. This onto works for the current session and will return to default on system reboot. 1. Log onto Tiger 2. Open file ...
Monitor Cable Connector Troubleshooting
Cable Connector Flex The connector should have a solid fitment and have no flex or wiggle when fitted to a monitor. Front and Back Confirm the connector is plugged into the monitor. While holding the BASE of the connector PUSH the connector towards ...
Brightness Adjustment - ViewMT-101 / ViewMT-081
Adjust Brightness Use the Brightness Buttons on the bottom panel to adjust brightness. Note: any changes will not be saved, when the monitor restarts it will go back to the default. Set the Default Brightness Monitor Settings Hold down the lower ...
Monitor Troubleshooting - Dual Monitor Setup (Atom Module Installed)
Used to determine the root cause of power, flickering/colour or touch related issues when there are 2 monitors installed on the installation. Display Ports Display port 1 (Atom - Customer Software) is on the topside and display port 2 (Atlas - ...