Monitor Blue Screen Tint

Monitor Blue Screen Tint

This fault will appear as if there's a blue overlay on top of the normal expected video feed on the monitor. 
Firstly, if there are 2 monitors it's recommend to follow the below troubleshooting guide to confirm the fault. 
If there is no second monitor then usual root cause is a faulty display cable. Replacing the cable should fix the issue. 

    • Related Articles

    • Monitor Troubleshooting - Dual Monitor Setup (Atom Module Installed)

      Used to determine the root cause of power, flickering/colour or touch related issues when there are 2 monitors installed on the installation. Display Ports Display port 1 (Atom - Customer Software) is on the topside and display port 2 (Atlas - ...

    • Monitor Cable Connector Troubleshooting

      Cable Connector Flex The connector should have a solid fitment and have no flex or wiggle when fitted to a monitor.  Front and Back Confirm the connector is plugged into the monitor.  While holding the BASE of the connector PUSH the connector towards ...

    • TigerMX-5 overheating | Monitor is not displaying camera feed

      What does it look like?  To the User The Black Moth Camera monitor will be slow to respond, appear to not be working, and/or not showing the video feed.  Universe Health 'CPU_TEMP' will display as False (or red) if it has detected that the system has ...

    • Monitor Settings Menu - Serial Number

      Access Settings Menu Hold down the lower brightness button and the hidden button to the left of it for 30 seconds or until the Settings Menu window pops up.  Serial Number Location Use the Brightness buttons to move left and right and the hidden ...

    • Monitor Settings - Set Network Configuration

      Installer Log In Press the cog/settings icon in the top right and use '2012' as the passcode.  Advanced Settings - GSM Press 'Advanced Settings' and then on the left press 'GSM'.  Now on the right side you can use the drop down button to select the ...